How To Set Up Multiple Tvs On One Satellite Receiver

In instance you're trying to find out how to connect ii TVs to one DISH network receiver, we got information technology hither for you! For this guide, we volition be bringing you lot all the information that you need to do it!

          To be able to connect ii televisions to but one DISH receiver, you need to use a splitter in order to distribute the signals to dissimilar devices.

Earlier we go into that, why would one want to connect two TVs to i receiver?

Why Should Y'all Connect 2 TVs to Ane DISH Receiver?

A lot of people are trying to detect out how they tin can connect two or more televisions to merely i DISH receiver. But what are the reasons why y'all would practice this? What are the pros and benefits that you can go out of it?

You'll Save Money

Ane of the primary advantages of connecting or linking two televisions to one receiver is that y'all'll be able to save coin.

How can it salve yous money, you may ask?

Well, this is past non purchasing a second set-summit box (STB) or receiver any longer. By doing this process, you can easily share the contents from Idiot box i to Tv 2 without any hassle!

Gain Control of What Your Children Are Watching

Another is that you will be able to control what other televisions are accessing. By linking two televisions to one receiver, you volition not stress about what other people are accessing through the TV.

Y'all hold the selection to finish them from watching, likewise every bit take control of what you want them to watch.

How Many Televisions Can You lot Use in 1 Receiver?

Other service providers only allow 1 television per receiver or set-meridian box. This is the reason why in that location are companies offering multiple secondary receivers for secondary televisions.

With the DISH network, though, they allow up to two televisions sharing ane receiver. And, for this method, you lot would accept to utilise a splitter to properly distribute the contents.

Then, what is the right DISH network for 2 TVs with 1 receiver setup? What are the steps in connecting or in linking multiple televisions to just a single receiver?

How to Connect Two TVs to 1 DISH Network Receiver [ Steps ]

connect two tvs to one dish network receiver

In doing this process, it is imperative that you know and understand all the things you need. Of course, information technology will involve a few devices; you lot wouldn't exist able to kickoff if you don't take them.

To start, yous demand the post-obit:

Three HDMI Cables
HDMI Splitter

Now, let's perform the procedure of connecting or linking two TVs to ane DISH receiver.

Footstep #1: Prepare Your HDMI Cables

Before you do anything, you lot have to make sure that your HDMI cables are functioning properly.

If they're broken or damaged, then it could spark a problem; most probable, the distribution of signals and receptions might not piece of work.

And so, double-check your HDMI cables and look for whatsoever splits, cracks, cuts, etc.

Footstep #two: Position the Splitter

Later that, the next thing you want to practise is to position the splitter. Make sure that yous position it at a location where its distance is equal to both televisions.

When that's all done, nosotros at present have to go through the process of connecting or linking them together.

Step #three: Plug the HDMI Cables into the Back of the Receivers

For this process, have one of the HDMI cables and plug it into the back of the receiver. Then, the next affair you lot have to do is to have the other end and insert it to the "IN" port of the splitter.

          Note:          It's of import that you plug it into the "IN" port, not the "OUT" port.

Step #4: Plug the HDMI Cables Into the TV

After that, the setup is halfway done. What happened is that you directed your receiver to distribute data to the receiver.

Then, what you have to practice side by side is to plug in the remaining two (2) HDMI cables to the dorsum of the televisions. Make certain that y'all're enlightened of where you plug it (e.g., if it'due south on HDMI 1, HDMI 2, etc.).

Step #5: Connect it to the Splitter

Lastly, connect the remaining unplugged HDMI ends from the television to the "OUT port of the splitter.

What this does is it readily distributes data from the receiver to both televisions.

Pace #vi: Toggle the Input

Once you're done doing that, the side by side thing you want to do is to toggle the input to see if yous're on the correct one.

This is a preventative measure out and so that you know y'all are on the correct rails. A lot of people forget to check their input and immediately jump to the conclusion that it'south not working.

And when y'all cease that, you should be able to share one receiver to two telly setups!

Read Next: How to Go Dish on Need without Net?

I Tried the Method just It'south Non Working, What Should I Do?

Were you lot able to follow the six-stride procedure correctly? Are you sure that you are currently on the correct input for both your televisions?

Splitter Problems

If y'all did not deviate from the process in any way, and then, the trouble might exist with the splitter. Not all splitters are created equally, and therefore, some splitters have defects.

What you take to practice in this instance is to test out a different splitter. From in that location, take a look and see if it makes a difference.

HDCP Errors

Several televisions have HDCP, brusk for high-bandwidth digital content protection. Information technology's the functionality that protects digital copyrighted content from being accessed on various devices.

So, this is another matter that you want to have a look at. There are multiple means of bypassing this anyways, you'll find tons of them online.

Contact A Local Professional or Expert

If yous notice it a chip of a nuisance and you don't desire to try anything else further, reach out to a local technician or professional well-nigh it.

Tell them what your dilemma is, or, better withal, have them visit your location and allow them to have it from there.

Who knew that the way to connect two TVs to 1 DISH receiver but requires a splitter?

This single device tin help you distribute content to multiple televisions in your household without the need to purchase a secondary set-top box (STB) or receiver!

Conclusion

A lot of you might have found it impossible to do, but the process of how to connect two TVs to one DISH network receiver is really piece of cake.

Even if you lot are not experienced in doing information technology, you will understand and cover it! As long as you have the right set of tools, y'all will easily exist able to do it!

Kevin has over v years of experience working in various Tech startups and providing Technical solutions. He has contributed to many Tech publications and websites.