How To Set The Time On A Acurite Weather Station

ACURITE Wireless Atmospheric condition And Atomic Clock Station Instruction Manual

ACURITE Wireless Weather
And Atomic Clock Station Instruction Manual

Transmission Setting for Time:

1.  To set the clock manually: agree the "Set up" button and press "Hr" to suit the hour, "MIN" to adjust the minutes.
2. To set the calendar manually: Concord the "DATE" button for three seconds and use the "Minute" (-) and "Hr" (+) buttons to adjust up and down. The yr will begin to flash; suit to the correct year and printing "Appointment" to confirm. Next, the calendar month will brainstorm to flash; conform and press "Date" to confirm. Finally, the date will begin flashing; adjust to the right date and printing "Date" to confirm.
   Setting the Alert Time: ZZ
   Hold the "AL" push on the back of the unit and press the "HOUR" button to set up the hour, then release the "AL" button. Adjacent, concur the "AL" button and printing the "Minute" push button to set the infinitesimal, release the "AL" push button when you are finished. You may printing the "AL" push button to view the current alarm time setting.
   To Select Alert Modes:
   Slide the alarm switch to: OFF: Alarm Off Bong: Daily alarm- no snooze function(press the "SNOOZE/Lite" button to stop the alarm for 1 day) Zz: Snooze Alarm (press the "SNOOZE/Warning" button for ten infinitesimal snooze, printing any button to stop the alarm for one day)

Express WARRANTY – INTERNATIONAL
Consumer may have more remedies at law than follows. Chaney Musical instrument Company warrants to the possessor, this product to exist free from defect in material and workmanship for one yr from appointment of buy.
CHANEY Instrument SHALL Not BE LIABLE FOR Whatsoever INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES, WHETHER ARISING IN CONTRACT OR TORT.
Chaney Musical instrument's obligation (at its choice) is limited to repair or supervene upon this production. For in-warranty repair, transport clock, accompanied by Guarantee, begetting Dealer'southward name and date of buy, with $v.00 to embrace handling and postage, to:

Acu-Rite instruments have been designed and engineered to provide accurate and reliable Measurements. Please read the instructions thoroughly before setting upward your wireless thermometer. The remote sensor is designed to stand or hang. For wall mounting, use the enclosed screw to mount to the desired surface. Use the slot on the back of the case to mount the remote sensor to the surface.

www.chaneyinstrum.ent.com
Tel: 877-221-1252 Made in China
www.chaneyinstrum.ent.com
965 Wells Street Lake Geneva, Wisconsin 53147

Quick Setup Guide:

1.  Install (2) "AA" batteries into the main unit commencement; and then install (2) "AAA" batteries into the remote sensor. Earlier endmost the remote sensor battery compartment, press the "TX" button on the remote sensor. The main unit will automatically begin to acquire the signal from the remote sensor. To select betwixt Fahrenheit or Celsius temperature display on the remote sensor display, push the "C/F" button located above the battery compartment. At this point, you may close the example of the remote sensor.
2. Afterwards the remote sensor has registered on the chief unit, the diminutive clock characteristic will automatically begin to search for the time and appointment bespeak.
3. Once the atomic clock bespeak has registered, the "OK" icon will announced adjacent to the tower icon on the main brandish (this may accept up to 24 hrs)
4. Press the "ZONE" primal to enter your existing fourth dimension zone to ready the correct hour. The time zone icon is located to the right of the tower icon on the chief display.
   P = PACIFIC STANDARD Fourth dimension 1000 = MOUNTAIN STANDARD Fourth dimension C = CENTRAL STANDARD Time E = EASTERN STANDARD TIME
5. Use a pen to push the "C/F" button To select between Fahrenheit or Celsius temperature display on the principal unit of measurement. The "C/F" button is located on the lower right corner on the back of the main unit.

NOTE: The chief unit will reject any manual settings when it is automatically searching for the temperature and time settings.
 Virtually The Wireless Thermometer

TROUBLESHOOTING:
The main unit may brandish "—" if the signal is being interrupted by outside interference. In most cases, the unit of measurement volition re-sync with the remote sensor on information technology'south own. It may also help to bring the remote sensor closer to the main unit of measurement to re-sync the primary unit and the remote sensor. Nevertheless, should this condition continue to occur, be sure to cheque the post-obit:

• A. The batteries may be low, replace and echo setup procedure.
• B. The sensor may be placed outside of the constructive transmission range (100 feet).
• C. The sensor may have outside interference that is preventing transmission.
• Setting upward additional sensors:
  (Boosted sensors can be purchased separately, Acu-rite model #00955) To add an boosted sensor, make sure the batteries are in the chief unit of measurement outset, then place
  batteries in the boosted sensor and press the "TX" button on the dorsum of the sensor. The main unit volition automatically search for an open channel to annals the signal on the main unit of measurement. The principal unit will take up to 3 remote sensors.
• Motorcar Curlicue:

If boosted sensors are used, the car scroll characteristic will brandish each aqueduct's temperature for 5 seconds. To activate the auto scroll feature, press the "aqueduct" button until the arrow icon appears on the temperature screen.

• Boosted Remote Sensor Placement Suggestions:
  Additional sensors can be purchased separately, Acu-rite model #00955
  • Exterior your home or place of business
  • Vino cellars
  • In the garage
  • Children's room
  • Gardens or greenhouses
  • Any location that remote temperature readings are beneficial

About The Atomic Clock

The chief unit of measurement has a special receiving device that picks upwards an AM radio signal broadcasted by the National Institute of Standards and Technology (NIST) in Fort Collins, Colorado. The bespeak is generated from the official U.South. atomic clock that is the most accurate timekeeping device in the world! The AM radio point transmits the exact hour, minute and 2nd of the twenty-four hours. The principal unit automatically seeks for the time point once a day (ii:00 a.m.) to update to the exact fourth dimension. Similar any AM radio bespeak, this units signal conquering is susceptible to interference such as existence surrounded by heavy concrete or metal panels. The reception of the fourth dimension betoken is also profoundly affected by electrical or electronic interference. To go the best functioning, identify the master unit nearly a window

• All-time RECEPTION LOCATIONS
  Some electronic appliances, such as computers, TV'southward, flourescent lights, microwave ovens, power lines, and metal siding walls can interfere with the time and temperature bespeak transmissions to the main unit. Try to place each unit of measurement at least 3 feet from these objects or almost a window for optimum performance.
• Daylight Saving Time (DST):
  The atomic clock will automatically adjust to DST and dorsum to standard time. By default, the characteristic is gear up to "ON" during initial gear up to make the time change. For areas not observing DST in the summertime, hold the "60 minutes" button located on the back of the chief unit of measurement for 3 seconds to plow the DST feature OFF.
• Transmission Search for the Diminutive Time Signal:
  If the Diminutive time point has not been automatically received within 24 hours, hold the "Ready" button and release to activate the point search. The tower icon will begin to flash. The "OK" icon will appear next to the tower icon once the signal is caused

Documents / Resources

References

• chaneyinstrum.ent.com

Source: https://manuals.plus/acurite/wireless-weather-and-atomic-clock-station-manual

Share this post